Wayne,
I know it seems along way away but you could try:-
Dr Paul Bernhard
Proform AG
Route DE Fribourg 42
CH - 1723 Marly 2
Switzerland
Email: Pde.Proform@com.mcnet.ch
Tel: 41 026 4364383
Fax: 41 026 4364329
Graham Tromans
Rover Group
-----Original Message-----
From: wlfoss
Sent: Monday, March 01, 1999 10:19 PM
To: rp-ml
Cc: wlfoss
Subject: Very small details
I have a potential need for a source that can produce small, highly
detailed parts to the specifications that follow. The part will be used
for
isolating and mounting IC chips in a test fixture. Dimensions are in
inches.
The part will have .007 thick fins that are .100 high and .050 wide.
They
may be attached to a solid structure at one end (along the .100) and/or
the
bottom (along the .050). There is a space between fins of .010 which
makes
the pitch .017. This part will fit over (or under) the IC and the fins
will
fit in between the "waterfall" of the leads. There are 60 leads per side
for a total of 240. The material must be strong, withstand a
temperature of
125 degrees C and must be electrically non-conductive.
I do not have drawings yet. We will consider any process.
I do know of Pure Fluid Magic, but Ms. Iverson, in my last conversation
with her, indicated that she was not taking on any outside projects.
Thanks in advance for your help.
Wayne Foss
Rockwell Collins, Inc.
Cedar Rapids, Iowa.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:51:07 EEST