Bart:
Have you tried any of the file converters offered by
www.compunix-usa.com ?
They specialize in file converters and my company has used their prodcuts
with much success for several years.
Good Luck!
Regards,
Glenn Whiteside
-----Original Message-----
From: b.kooijmans@ind.tno.nl <b.kooijmans@ind.tno.nl>
To: rp-ml@bart.lpt.fi <rp-ml@bart.lpt.fi>
Date: Friday, October 29, 1999 3:41 AM
Subject: Thanks for reply about STL and IGES translators (so far) but also
call for more reply.
>Hello listers,
>
>I would like to thank everybody for replying to my question about your
>experience with STL and IGES translators and the quality of the files they
>generate. (see previous mail below)
>However I feel there must be a lot more packages, stand alone ore as module
>of a big CADsystem, then that I received comments on so far. So if anyone
>feels like writing a few lines before the weekend starts......
>
>Best regards,
>
>Bart Kooijmans
>
>Dear toolers and mailers,
>
>We've discussed this topic many times, but the process is still not at its
>best so I would like some further feedback on this:
>
>I know about most IGES to STL converters and IGES-fixers, stand alone as
>well as modules of big CAD-packages. And they all promise wonders of
course!
>
>
>That's why I would very much like to know the experience of other users:
>
>What package do you use to generate STL files from a surface or solid model
>and are you satisfied? If you have a little more time: What is the quality
>of the generated stl-files (overlapping, thin, reversed triangles etc?)
>Same question for IGES fixers?
>
>Best regards and have a nice weekend,
>
>Bart Kooijmans
>
>
>Ing. N.M.J.P. Kooijmans.
>Prototyping / Tooling Engineer
>Production Development Division
>Oostsingle 209, P.O. Box 5073
>2600 GB Delft, the Netherlands
>
>Phone: +31 15 2608 729
>E-mail: B.Kooijmans@ind.tno.nl
>Fax: +31 15 2608 725
>
>Visit TNO at: http://www.tno.nl/instit/indus/prototyping/
><http://www.tno.nl/instit/indus/prototyping/>
>
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:53:13 EEST