From: Bruce LeMaster (email@example.com)
Date: Mon Jul 23 2007 - 17:08:23 EEST
I've never had good luck "filtering" TPM or Polyflush (what we use now.)
We've tried exposing the loaded TPM to a UV light to cure out the resin
and then filter it but I was not happy with the results. I believe that
there are some users that have this kind of a set up and it works for
them. I'm just sure what they are doing differently.
If you are using a large amount of TPM/Polyflush then you may want to
consider a distillation process to recover pure solvent from the loaded
mixture. Contact Chris Hendrix at CBG Technologies,
firstname.lastname@example.org <BLOCKED::mailto:email@example.com> . He
sells a unit that will do just what you're looking to accomplish.
Bruce E. LeMaster
Applied Rapid Technologies Corporation
1130 International Parkway, Suite 127
Fredericksburg, Virginia 22406
540-286-2266 / 540-286-5252 fax
From: firstname.lastname@example.org [mailto:email@example.com] On
Behalf Of Wehl
Sent: Monday, July 23, 2007 8:43 AM
Subject: [rp-ml] How to filter TPM?
Hello to all,
I would like to know what filter mesh I should use to filter used
TPM, used to clean SLA parts ( Somos resin ).
In this moment I've put a 1 um filter but it doesn't seem to filter
the disolved resin well.
Would it be better to first use UV light and then through the filter?
Any input is highly apreciated, thank you!
Lammertus de Vries
Wehl & Partner
This archive was generated by hypermail 2.1.7 : Tue Jan 01 2008 - 18:13:06 EET