From: Alex Do (firstname.lastname@example.org)
Date: Wed Sep 21 2005 - 04:32:06 EEST
I'm also enjoying Paul F. Jacobs SME book "Stereolithography and Other RP&M
Technologies" as a fairly detailed look into the SL process. It starts at a
high-level and comes down to a fair level of depth in understanding SL
issues. It isn't super-low level but it gets me low enough to point me to
the right directions ... for example I'm currently trying to understand
chemical processes and resultant material properties in SL, and it's
presented a fair overview of the polymerization process but I'm going to
refer to my polymer engineering books for more detailed answers.
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf
Of Bob Olsen
Sent: Wednesday, August 24, 2005 12:31 PM
To: 'Ricardo Calumby'; email@example.com
Subject: RE: [rp-ml] Books on Rapid Manufacturing
Ricardo, I would recommend Todd Grimm's book "User's Guide to Rapid
Prototyping" as a good place to start.
From: Ricardo Calumby [mailto:firstname.lastname@example.org]
Sent: Wednesday, August 24, 2005 9:22 AM
Subject: [rp-ml] Books on Rapid Manufacturing
Does anyone know which are the most recommended books on Rapid Manufacturing
process (SLS, SLA, FDM and etc.)?
Converse com seus amigos em tempo real com o Yahoo! Messenger
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:21 EET