From: Steinar Killi (Steinar.Killi@aho.no)
Date: Thu Sep 15 2005 - 13:26:03 EEST
We are building a structure of aluminium tubes (diameter 40 millimeter)
with joints made of duraform (sls).
The structure has 96 different joints made of duraform.
We do now have problems gluing the duraform joints to the aluminium
The glue stick to the duraform part but not to the aluminium tube. We
can easily twist of the tubes and hardly any glue are left on the
aluminium, but a lot on the duraform part.. Neither the contact between
glue and duraform, or the glue itself are breaking
The glue we are using is an acrylic based two component glue type from
We have cleaned the contact areas on the aluminium with acetone
The construction is 10 meter high so we need this to work...
Thanks for any help!
Oslo School of Design and Architecture
This archive was generated by hypermail 2.1.7 : Mon Jan 02 2006 - 08:09:21 EET