From: Jon Broome (firstname.lastname@example.org)
Date: Wed Dec 10 2003 - 19:59:21 EET
We are new to silicon molding and are having trouble with the silicon not
curing uniformly (and staying gooey) where the silicon contacts the plastic
parts. Has anyone solved this? Any assistance or directions to assistance
wold be greatly appreciated.
Tarleton Bull, Inc.
1939 W. 2nd AVE B5
Eugene, OR 97402
toll Free (877) 566-5541
fax (541) 687-9599
cell (541) 953-7725
----- Original Message -----
To: <email@example.com>; <firstname.lastname@example.org>
Sent: Tuesday, December 09, 2003 11:08 AM
Subject: Re:Can anyone direct me to a list of the upcoming RP trade shows.
> In a message dated 03-12-09 13:39:30 EST, email@example.com writes:
> << Subj: Re: Service bureau Directory and Database Updated
> Date: 03-12-09 13:39:30 EST
> From: firstname.lastname@example.org (Jon Broome)
> To: EdGrenda@aol.com, email@example.com
> Can anyone direct me to a list of the upcoming RP trade shows.
> Jon Broome
> Tarleton Bull, Inc.
> 1939 W. 2nd AVE B5
> Eugene, OR 97402
> You can find a very complete list of upcoming RP events on our site. Click
> the link next to the calendar icon at the top left of the home page (or
> elsewhere). One problem is that most events for '04 haven't been formally
> announced yet.
> Ed Grenda
> Castle Island Co.
> EdGrenda@aol.com (email)
> The Worldwide Guide to Rapid Prototyping
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:26 EET