From: Jon Broome (firstname.lastname@example.org)
Date: Tue Nov 18 2003 - 23:01:48 EET
We've just been informed of a known software bug in the Insight Software
that runs the Stratasys Titan. It seems that the time estimation function
greatly over estimates time required to create parts. Stratasys knows of
this error. Does anyone have a work around or a rule of thumb we can use to
estimate build times?
Tarleton Bull, Inc.
1939 W. 2nd AVE B5
Eugene, OR 97402
toll Free (877) 566-5541
fax (541) 687-9599
cell (541) 953-7725
----- Original Message -----
From: "Timothy J Gornet" <email@example.com>
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Tuesday, November 18, 2003 9:22 AM
Subject: Re: SLS and nitrogen flow
> Just happened to me when our bulk tank ran out over the weekend. It
> Build stops when O2 level gets too high. Note: Will always happen in
> last half inch of very tall build.
> Tim Gornet Computer Aided Engineering Consultant
> INTERNET: firstname.lastname@example.org
> SLUGNET: Vogt Bldg. Rm 101, University of Louisville, Louisville, KY
> PHONENET: (502)852-0714 FAXNET: (502)852-8890
> Rapid Prototyping Center
> >>> Scott Tilton <email@example.com> 11/18/2003 11:31:56 AM >>>
> What happens to an SLS build (in a DTM 2500+ if that matters) if you
> run out
> of Nitrogen.
> If the flow / pressure drops to zero. . .should the machine stop?
> Or will it keep running until the Oxygen sensor indicates that the
> chamber's level of O2 has raised too high?
> Thanks in advance for any input.
> Scott Tilton
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:22 EET