From: Blasch, Larry (LBlasch@OPW-FC.com)
Date: Thu Oct 09 2003 - 16:54:22 EEST
Since I don't make wax RP parts at the moment, I've never had the problem of
shipping them, but I have a suggestion for how you might accomplish it.
If you pack the part in fine sand (or clay, talc, or plaster) and vibrate it
to compact it around the part, it will produce a fine nest to hold the part.
The problem is with the material shifting and the part being put under
If you pack the sand around the part in a bag, and vacuum seal it, you will
end up with a stable brick of sand that is relatively immune to damage.
They sell coffee that way and I am amazed at how strong the brick of coffee
is before it's opened. (It works the same way as the v-casting process.)
Of course this will add to the shipping cost due to the increase in weight,
but hey, if you can guarantee shipment of undamaged parts...
Just an idea.
Lawrence R. Blasch
CAE Systems Administrator
OPW Fueling Components
P.O. Box 405003
Cincinnati, OH 45240-5003 USA
Voice: (513) 870-3356
Fax: (513) 870-3275
From: Osbornmail@aol.com [mailto:Osbornmail@aol.com]
Sent: Wednesday, October 08, 2003 10:53 AM
Subject: Idea for research project to solve shipping nightmare
Kenny / Phill et al
Further to the previous thread on Shipping of parts, etc. and having just
received an undamaged, apparently well-packaged box of 2 urgent parts (one
of which was in 6 pieces, the other in 7 pieces...) I have a suggestion for
a future research project....
How about sorting out a definitive packaging solution for waxes / delicate
layer built parts which more often than not end up broken or damaged
(usually only on critical projects!)
Having witnessed over 10 years of trial and error (as both supplier /
customer) using various combinations of: boxes within boxes, eps peanuts,
bubble wrap, sealed air pockets, inflatable bags, cotton wool, shredded
paper, silicone rubber, ceramic etc. there is still no comprehensive
solution for this as far as I am aware.
Geometry and material are the key variables, and I am sure that list members
could provide some suitable test geometries. (Wax turbine wheels for
automotive diesel turbos for starters).
Potential end result could be a packaging solution for delicate parts
available at a premium. If this could effectively guarantee the safe
arrival of your parts, then it would be worth the extra ($10? $50? $100?)
Am I crazy or would this be best solved by a research project approach?
I am tortured by visions of boxes suspended by springs on all sides that
couriers could play soccer with and still not break the part(s) held safely
Any comments / ideas welcome.
Fenland RP Ltd
Mobile: +44 (0) 7881 92 00 38
Tel: +44 (0) 1406 350 124
Fax: +44 (0) 1406 350 183
In a message dated 03/10/2003 09:32:47 GMT Standard Time,
Subj:PhD studentship available - UK based
Date:03/10/2003 09:32:47 GMT Standard Time
From: K.W.Dalgarno@leeds.ac.uk <mailto:K.W.Dalgarno@leeds.ac.uk>
To: firstname.lastname@example.org <mailto:email@example.com>
Sent from the Internet
Research Studentship in Mass Customisation of Foot Orthoses for
The appointment will be for a period of three years, with a start date
between the 1st November 2003 and the 1st January 2004. The successful
applicant will work on an Arthitis Research Campaign Research Project to
be carried out collaboratively by the School of Medicine (Academic Unit
of Musculoskeletal Disease) and the School of Mechanical Engineering to
develop approaches to the rapid provision of foot orthoses for sufferers
of rheumatoid arthritis, using advanced CAD/CAM and rapid prototyping
Applicants should have a first or upper second class UK honours degree
(or equivalent qualification) in Mechanical Engineering, Medical
Engineering or a closely related discipline. They should also
demonstrate enthusiasm, project management abilities and team-working
Both the Academic Unit of Musculoskeletal Disease and the School of
Mechanical Engineering are internationally respected for the quality of
their research activities.
The successful applicant will have their University fees paid and will
receive a tax free maintenance payment of =A313,220 in the first year,
rising to =A314,761 in year 3 assuming satisfactory progress. The
scholarship is only available to candidates from the UK or other EU
Informal enquiries about the post may be made to Dr KW Dalgarno.
* 0113 343 2234
Fax: 0113 343 2150=20
Applications should be made on the standard University of Leeds
application form. The application procedure (together with the
opportunity to download an application form) is outlined at:-=20
or again, e-mail Dr KW Dalgarno.
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:12 EET