From: JB Ventures BV (email@example.com)
Date: Wed Oct 08 2003 - 12:06:45 EEST
We can run the material PPSU on our machine for you. A typical material for
Van: firstname.lastname@example.org [mailto:email@example.com]Namens
Verzonden: woensdag 8 oktober 2003 10:12
Onderwerp: Medical grade materials
I have a need for further clarification of the status of RP materials
suitable for medical applications. The StereoCol SL 9XXX materials have been
tested successfully acc. to USP 23 Class VI. The USP Class VI test of
Duraform in 1997 was also successful and so was the ISO 10993-1 test of
EOS/PA 2200 in 2001.
- Are there other relevant tests made on these or other RP materials?
The tests above were made to verify the low or non-existant biological
response to direct exposure. My need however is to make a component for
medical equipment which is not in contact with the body but where fluids or
gases pass the component and detrimental emission from the component would
be fatal for the patient.
- Do the tests mentioned above have any relevance for my need?
- What is known about the emissions from well manufactured and possibly
- Are there tests made or other circumstances known which could be helpful
Any help is much appreciated!
IVF Industrial Research and Development Corporation
SE-100 44 Stockholm
Phone: +46 (0)8-21 31 74
Fax: +46 (0)8-20 22 27
Mobile: +46 (0)70-780 62 15
Delivered using the Free Personal Edition of Mailtraq (www.mailtraq.com)
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:11 EET