From: Alejandro Mugetti (firstname.lastname@example.org)
Date: Sun Sep 28 2003 - 02:43:09 EEST
good idea Sean,
Plating the wax, with cooper and ambient temperature and later with nickel.
Only calculate the thickness of deposition for put the glass and tamp later.
----- Original Message -----
From: "Sean Wise" <email@example.com>
To: "'Alejandro Mugetti'" <firstname.lastname@example.org>
Sent: Saturday, September 27, 2003 5:50 PM
Subject: RE: Watch case prototype
> I don't think it would make much sense to electroform over the wax but it
> would be feasible. If you have a more durable plastic or even want to try
> strong pattern board, we could probably plate that.
> -----Original Message-----
> From: email@example.com [mailto:firstname.lastname@example.org]On
> Behalf Of Alejandro Mugetti
> Sent: Saturday, September 27, 2003 3:35 PM
> To: Vlad Dumitrescu; email@example.com
> Subject: Re: Watch case prototype
> Dear Vlad,
> The more easy and cheap, is machine the two sides of the watchcase in wax
> with DeskProto,
> in a precission CNC machine like Roland 3D. Later you can make the
> in brass, in the investment casting process.
> Alejandro Mugetti
> Memory Promotional Enterprise
> Rua Inacio Manoel Alvares 556 - Rio Pequeno.
> (Km 16 da Raposo Tavares)
> CEP:05372-110 - Sao Paulo - SP - Brasil.
> TEL:(11) 3785-5000; 3785-7127; 3785-2824; 3785-6999.
> FAX:(11) 3784-6747.
> email: firstname.lastname@example.org
> site: http://wwww.memorybrindes.com.br
> ----- Original Message -----
> From: "Vlad Dumitrescu" <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Saturday, September 27, 2003 1:54 PM
> Subject: Watch case prototype
> > I'm interested in finding options for prototyping a small part, a
> > watch case created as a 3d in Cobalt (Ashlar). The shape is fairly
> > but has small details, rounds, chamfer, or small 0.35mm steps that need
> > be well reproduced. It can be CNC out of stainless steel or brass or any
> > other material or technique that will produce a prototype that can be
> > polished and have a polished metallic finish. In the past I used Sanders
> > prototypes and then cast them in silver, but I'm interested in other
> > alternative solutions. I can post a 3d of tha case if necessary.
> > Vlad Dumitrescu
> > Perspective Inc, Nyack, NY USA
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:18:10 EET