From: Anshuman Razdan (firstname.lastname@example.org)
Date: Fri May 09 2003 - 20:09:06 EEST
Geomagic is good -- personal experience.
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org] On Behalf Of John M. Irvin
> Sent: Friday, May 09, 2003 8:37 AM
> To: Rapid Prototyping
> Subject: re: point cloud manipulation
> Can you all pls give your opinions on the following
> software's used in scanning and point cloud manipulation.
> CopyCAD - Delcam
> Rapid form
> I would like to know how these software's have made it easier
> to get from point cloud or ruff stl data to a finished model.
> Things like smoothing, alignment of scans, and especially
> laying surfaces either automatic or manually in design need
> situations. all input will be appreciated to make our lives easier.
> John Irvin
> Neco Incorporated
> 3901 Nome Street, Unit 8
> Denver, Colorado 80239
> Ph 303 574 1077
> Cell 303 668 1663
> write to: email@example.com
> web: www.necoinc.com
> "We will find a way, or we will make one"
> The information transmitted is intended only for the person
> or entity to which it is addressed and may contain
> confidential and/or privileged material. Any review,
> retransmission, dissemination or other use of, or taking of
> any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited.
> If you received
> this in error, please contact the sender and delete the
> material from any computer.
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:27 EET