From: Terry Wohlers (email@example.com)
Date: Fri Apr 18 2003 - 05:57:32 EEST
I recommend that you contact the following individual. He has ran a LENS system for some time and should be able to help you out.
Dr. Brent Stucker
Mechanical & Aerospace Engineering
Utah State University
Logan, UT 84322-4130
Wohlers Associates, Inc.
OakRidge Business Park
1511 River Oak Drive
Fort Collins, Colorado 80525 USA
P.S. Note that my email address has changed from firstname.lastname@example.org to email@example.com.
----- Original Message -----
From: Bimal Kad
Sent: Thursday, April 17, 2003 3:22 PM
Subject: LENS Prototyping/ outsourcing
We are attempting to locate a LENS rapid prototyping facility
that can make some parts (stainless steel and or Ti-alloys)
on an as needed basis. The parts are routine geometric shapes
such as squares, rounds etc.
If you are able to quote on this project, please send us
information about your capabilities. Thanks.
Bimal Kad, Ph.D.
Dept. of Structural Engineering
University of California-San Diego
409 University Ctr., Rm 117
La Jolla, CA, 92093-0085
Tel: 858 534 7059
Fax: 858 534 6373
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:22 EET