From: Ing. R.W. van der Burg (email@example.com)
Date: Tue Mar 18 2003 - 15:44:59 EET
We can help you futher with this matter.
Please contact me to discuss the subject in detail.
Roel van der Burg
TNO Industrial Technology
De Rondom 1
5612 AP Eindhoven
PO box 6235
5600 HE Eindhoven
tel: +31-(0)40 - 26 50 614
fax: +31-(0)40 - 26 50 769
gsm: +31-(0)6 - 23 68 63 54
Bram de Smit wrote:
> Hi list,
> For our research we would like to have a 3D scanner that is capable to scan objects from say 10 times 10 cm (4 times 4 inch) up to one square meter (40 times 40 inches)
> The accuracy that we want is not extremely high and also the resolution doesn't need to be top of the bill.
> We found that the Minolta VI300 or VI700 would be really suitable for us but they seem not to be on the marked anymore, as they are replaced by the VI900.
> Unfortunately scanners prove to be quite expensive and our budget limited.
> My question: does any of you know about a (low end) 3D scanner that can be bought for around $15000,-?
> Also a used scanner could be ok, as long as it works.
> thanks in advance
> Bram de Smit,
> Delft University of Technology / Faculty of Design, Engineering and Production (DEP) / room nr. 10-3A-31 / Landbergstraat 15, 2628 CE, Delft, The Netherlands / Phone +31 15 2783788 / Fax +31 15 2787316 / E-mail A.deSmit@IO.TUDelft.NL / www.io.tudelft.nl/research/ica/
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:16 EET