Date: Sat Jan 25 2003 - 20:38:30 EET
In a message dated 03-01-25 00:00:10 EST, firstname.lastname@example.org writes:
<< At 08:48 PM 1/23/2003 -0500, Rob Connelly wrote:
>I have a resin question for the group. I have a customer who wants to
>make some tiny little parts on a high-res SL machine for a medical
>application. Trouble is, he needs the parts for a process similar to
>investment casting wherein he will shell them with something, and then
>dissolve the SL part back out of the shell. He can't use high
>temperatures as in investment casting -- he needs to use a solvent.
>So, is anyone aware of a resin that can be used in a high-res SL machine
>(either a Viper or a 250HR) that can dissolve in acetone, xylene, MEK, or
>other such nasty chemical? Do the old acrylates dissolve? My customer
>has told me that just softening or deteriorating is not good enough -- it
>has to dissolve. If this does exist, do you know of a vendor who has this
>combination to whom I can outsource the job?
>Thanks in advance for your time,
>FineLine Prototyping, Inc.
>6300 Limousine DR
>Raleigh, NC 27613
Rather than outsource this to a stereolithography vendor, you might consider
a couple of new processes which are squarely aimed at this sort of mesoscale
application. MEMGen is commercializing one now, but the Shape Depostion
Manufacturing (SDM) process being developed at Stanford might be right on the
money. Tiny fugitive molds are applications of both technologies. There are
links to the Stanford site on this page in our directory:
and MEMGen is at www.memgen.com
Castle Island Co.
19 Pondview Road
Arlington, MA 02474 USA
781-646-6280 (voice or fax)
The Worldwide Guide to Rapid Prototyping
This archive was generated by hypermail 2.1.7 : Sat Jan 17 2004 - 15:17:04 EET