From: Chuck Alexander (email@example.com)
Date: Thu Nov 21 2002 - 23:45:37 EET
It sounds as if you may have a mirror oscillation problem. A mirror/galvo may need to be replaced.
Solid Concepts Inc.
28231 Avenue Crocker, #10
Valencia, CA 91355
From: Dave Burbrink [mailto:firstname.lastname@example.org]
Sent: Thursday, November 21, 2002 9:05 AM
Subject: New twist on SLA problem.
If you have been following this list, you may be aware of the discussion about our 250 (HeCD laser) having a problem. The parts that I've been building have primarily been very geometric. Last night, I built a handle that is very organic. I had the same problem -- rough on the left and rear of the parts, smooth on the right and front. But on these organic parts, it is clear that the roughness is following a pattern -- it's like wood grain. Earlier, I tried to describe the problem as being "orderly" but I couldn't quite put my finger on it. The roughness is clearly on the left and rear. It is clearly orderly. Does this shed light on anything else?
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:39 EET