From: JP Harrison (email@example.com)
Date: Fri Nov 08 2002 - 23:38:34 EET
Or for large flats and trapped volumes you could also use a single sweep at
.7 unit/sec. I have gone down to .5 unit/sec on a single sweep on the
sla500 and sla5000.
James P. Harrison
VP of Product Development
2991 N. Powerline Rd.
Pompano Beach, FL. 33069
From: firstname.lastname@example.org [mailto:email@example.com]On Behalf
Of Kamara, Sheku
Sent: Friday, November 08, 2002 9:26 AM
To: Armando Alves; A Leask
Subject: Re: Experiences using 3d Si resins
To avoid bubbles on large flat surfaces, do multiple re-coats for those
flat sections and set the speed of the zephyr to 1 unit/sec.
Increased build time, is the drawback.
Hope that's helpful.
At 10:28 AM 11/8/02 +0000, Armando Alves wrote:
dear David and dear list,
i´m running AccuGen and AccuDur materials on my viper and i
think the major problem of the material is Bubbles , they
appear during the build and you can see them on the part ( on
the inside and sometimes on the surface ) , this affect the
surface quality of the final part.
i´ve tried everything to get ride of bubbles but i´m not suceed
I don´t know if others materials have the same problem or not.
Besides this i´m satisfied with the material.
Citando A Leask <firstname.lastname@example.org>:
} Has anyone out there got any experience using the 3d
} Si resins? Accura si
} 10, 20, 30 and 40 are the ones that we are being
} offered. What do people
} think about the accuracy and durability of these
} resins? What applications
} are they being used in? How do they compare to the
} Somos and Vantico resins?
} Any help would be appreciated - I'm sure that this'll
} stir a fierce debate.
} David Smith
} MSN 8 with e-mail virus protection service: 2 months
SAPO ADSL.PT Agora o kit apenas por 75 Eur. e tráfego ilimitado até ao
final de 2002!
Mais informações em http://www.sapo.pt/kitadsl
Manager of Operations
Rapid Prototyping Center
Milwaukee School of Engineering
1025N Broadway Street
Milwaukee, WI 53202
Tel.: (414) 277-7189
Fax: (414) 277-7470
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:35 EET