From: Thoms Corp (email@example.com)
Date: Mon Jun 10 2002 - 16:40:46 EEST
I've ran the Solidscape MM6B for years and the tank is large enough for more
than twenty-four hours of running. However, to keep the static head
(pressure) more constant, I would top-off every twelve hours. The jets run
more reliably with a constant head.
Tom Richards, Metallurgist, Thoms Corp
----- Original Message -----
From: "Michael Ervin" <firstname.lastname@example.org>
Sent: Sunday, June 09, 2002 9:06 PM
Subject: Objet or other printers
> Can anyone tell me if printers like the Objet can accurately predict ahead
of a build exactly how much build and support materials are required without
going through extensive calculation time? How can you be sure there is
enough material in your printer to finish a build?
> Thanks in advance.
> For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:53 EET