From: Joan Guasch (firstname.lastname@example.org)
Date: Mon May 06 2002 - 16:28:45 EEST
> As I know in Direct Metal Laser Sintering technique, any plastic
> binder is
> not added to the steel powder, and any secondary sintering or
> process is not required. isn't it?
You're right, no secondary infiltration nor infiltration.
> how about LENS process?
> what is expected from LENS process over SLS or DMLS? Ok, parts
> produced with
> LENS process is fully dense in one step in compare with SLS or DMLS.
> Moreover, only LENS parts could be used as die for metal forming. But
> dimensional accuracy is not well as in SLS or DMLS and it
> requires secondary
> finish milling operation.
Yes, that's partly true. Both with DMLS and SLS you will need to
post-process the inserts by polishing, grindind or even milling. Let's hope
that with new powder materials that work could be avoided.
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:46 EET