From: JP Harrison (email@example.com)
Date: Mon Feb 11 2002 - 21:03:59 EET
I need some help with a sweeper stall error. It all started gradually with
one sweeper stall last Wednesday. Then 3 sweeper stalls on Thursday and
about 12 stalls on Friday. Now it stalls every 3 layers. It does not stall
in the middle of the parts, only at either end. This includes large builds
and small builds. When the stall occurs, we tried moving the recoater blade
using the computer and we hear a clunk. It seems that it is trying to move,
but doesn't. Once the recoater blade is physically moved, it will work fine
for a very short time. I've heard of a bug with smart sweep, but I don't
know how to turn it off.
Below is what we have tried so far:
remove cover - no obstructions
disconnected recoater from motor, moves freely
checked recoater flags
Any suggestions would be greatly appreciated.
James P. Harrison
Director Of Operations
2991 N. Powerline Rd.
Pompano Beach, FL. 33069
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:13:27 EET