You might also want to check out Trumph lasers (I can't find their contact
details at the moment) but they do a combined press and laser cutting system
which greatly impressed me when I visited their facility last year.
Dr. Chris Sutcliffe
Rapid and Micro Manufacturing Research
The University of Liverpool
Department of Engineering
Tel. (0151) 794 4316
Fax. (0151) 794 4675
Mobile (0151) 794 7729
From: firstname.lastname@example.org [mailto:email@example.com]On Behalf
Of Mark Wynn
Sent: 12 December 2001 13:05
To: firstname.lastname@example.org; email@example.com
Subject: Re: sheet metal
You might want to check out Baltec. They make a multipurpose
machine that will punch, notch, contour, and bend flat stock material.
They claim to have quick set up times and rapid turn around times for
that are simple or complex.
Hope this helps.
Yazaki North America Inc.
>>> "G. Mensing" <firstname.lastname@example.org> 12/11/01 08:08PM >>>
Does anyone have any information on rapid prototyping for sheet metal?
With this I mean making sheet metal sheets into products and not the layer
based technology so frequently used in RP.
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:58:17 EET