TNO Releases FlashTL Engineer™ 2.0
TNO Industrial Prototyping introduces their new FlashTL Technology with the release of FlashTL Engineer™ 2.0.
FlashTL Technology has been developed as a base for future Prototyping, Tooling and Rapid Manufacturing developments by TNO Industrial Prototyping and Partners.
FlashTL Engineer™ is the first commercial package which enables the user to create full ISO 2D drawings from STL models, including drawing borders, title block, ISO-scales and measurements. Using this technology, STL based Prototyping, Tooling and Manufacturing can finally be fully deployed in model- and tool shop environments.
FlashTL Engineer™ 2.0 provides the following features:
1 2D ISO Drawings from STL
2 STL Splitting using Patented Intelligent Triangle Selection.
3 STL Editing
4 STL Analyzing
5 STL Reduction
6 STL Painting
A fully functional version can be purchased for only € 99
A demo version of FlashTL Engineer™ 2.0 will be available at our booth at EuroMold 2001, or can be downloaded soon.
Visit TNO on the Euromold 2001 at Hall 9.1 stand D16
For more information about the rp-ml, see http://rapid.lpt.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:58:07 EET