Re: Very small prototypes

From: Werner Bauer (werner.bauer@imf.fzk.de)
Date: Thu May 17 2001 - 12:40:10 EEST


Dear Steinar,

we are using molding and casting processes for the fabrication of ceramic or
metallic parts with similar shapes and even smaller sizes. A rapid
prototyping process chain enables prototype preparation with these
materials. For quick information please take a look at
http://www.fzk.de/pmt/
or send me a mail.

Best regards

Dr. Werner Bauer werner.bauer@imf.fzk.de
Forschungszentrum Karlsruhe GmbH Institut fuer Materialforschung III
Hermann-von-Helmholtz-Platz 1 D-76344 Eggenstein-Leopoldshafen
Tel. (+49) 07247-822990 Fax (+49) 07247-824612

----- Original Message -----
From: "Steinar Killi" <Steinar.Killi@aho.no>
To: <rp-ml@ltk.hut.fi>
Sent: Tuesday, May 15, 2001 12:31 PM
Subject: Very small prototypes

>
>
> Dear list!
>
> We are trying to find a method to make prototypes of a very small turbin,
> Diameter 9 mm, height 2 mm, the turbinblades are 0.5 mm thick.
> Is this possible? and if so, who could do it?
> Drawings of the turbin can be achieved by contacting me either by mail
> or by phone.
>
> Regards
>
> Steinar Killi
> Ass. Professor
> Oslo School of Arxhitecture (Norway)
> ph: +47 22 99 71 46
>
>
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/

For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/



This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:57:18 EET