There are a number of grey (gray) scale conversion packages - which take a
photo, break it down into a range of grey (usually 256) and then assign
each grey a reative height in Z. You can usually define if the darks are to
be high or low, and the total range in Z. However, if you look at a standard
photograph you may see dark eyebrows, shadows around the eyes, maybe dark
hair, and nose shadows. Now if you assign white to be Z+20 and black to be Z
0 what yo will get is the jaw line, nose and cheeks up at the top, the
shadows around the nose diving away, and really deep depressions at the eye
brows - which really should be higher than the cheeks. More crucially, if
the subject has really dark hair, the head will be truncated at the
In short, Chris Lawrie is right you can turn a photo into a 3D toolpath in
minutes,but this will not be a true 3 dimensional representation of the
face. I haven't come across a piece of software that will take a standard
photograph and build a true representation of that face in minutes I am sure
Artcam will not build a correct 3D face in minutes
To get a true 3 dimensional plaque of somebodies face you need to spend time
editing the photo to get the right tones to build the face correctly.
The only pieces of software that we have come across that allows you
- to modify the image,
- build the 3D face and check if its ok,
- then modify the image, and see the changes etc etc
all within the same package is Type 3 from Vision Numeric of France. Once
the 3D representation is close you can interactively add, remove, smooth etc
the resulting 3D surface.
I would recommend you look at their pages at www.type3.com
Response Associates Ltd.
From: firstname.lastname@example.org [mailto:email@example.com]On Behalf Of
Sent: Thursday, March 15, 2001 9:23 AM
To: Carl Dekker; firstname.lastname@example.org
Cc: Domenic (E-mail); Maida Koller (E-mail); email@example.com
Subject: RE: gray scale recognitaion?
Delcam's ArtCAM is the tool you need. ArtCAM has a number of modules for
the creation of 3D reliefs from photographs, vectors, scan data, etc.
ArtCAM will complete the task you have described in minutes.
Check out www.delcam.com or www.artcam.com
If you need any more detail, please do not hesitate to contact us at our
North America Offices (James Booth 519 974 8088)
Chris Lawrie Product Marketing Manager
Delcam Plc Email firstname.lastname@example.org
Talbot Way tel +44 121 766 5544
Small Heath fax +44 121 766 5511
Birmingham mob +44 411 353330
B10 OHJ, UK www.delcam.com
From: Carl Dekker [mailto:email@example.com]
Sent: 14 March 2001 21:33
Subject: gray scale recognitaion?
I have a client looking for someone who can do the creation of a 3d file
from a photo of a persons face. They would be looking to take the file and
make a part from it, possibly via Vacuum forming.
I remember a thread regarding these applications some time ago but could
not find anything in the archives. Any help would be appreciated.
2020 Dean St. Unit I
Saint Charles, IL 60174
630-584-4500 ext. 227
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:56:57 EET