At 02:00 PM 2/9/01 -0500, NECOINC@aol.com wrote
> Has any one used any software to easily translate a 3d dxf file into a
> surface file and then be able to generate a water tight stl file for print.
We have a Dxf to Iges product (DXFtoIG) which will convert DXF face and mesh
to surfaces. Then our Iges-to-Stl product (IGtoSTL) can be used to
convert to STL.
IGtoSTL will fix up any poorly matched suface edges etc. to produce a valid
Keep in mind: If the DXF is from a solid, the DXF will contain probably be
and so STL facet quality is mostly determined by the facet quality in the
C. Brock Rooney, Pres., Brock Rooney & Associates Inc. (Brockware)
915 Westwood Birmingham MIchigan 48009 USA
(248)645-0236 fax(248)645-9020 email email@example.com
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Fri Jan 04 2002 - 09:56:49 EET