The runtime on the machine is 14,000 hours. If you want more detailed specs, check out the similar 2030H on Helisys's web site.
ref: last msg sent....
The machine is a 2030E. It was built in 1996. It's full model # is 2030E - 0100.
The Serial # is 939, Laser Model #F48-5-28SW
The machine is in excellent condition.
It's dimensions are 82"long x 58"wide x 56" high
It requires space all the way around the machine for access. We also have an extinguisher system hooked up, and a customized ventilation system that I'd send photos of if you're interested. It requires 220V, 60Hz, 50A power. Outside ventilation at 1000 CFM minimum. We've altered this to add a filter to the venting, to extend fan life in the venilation system. We also have several rolls of paper and some customized equipment that would go with the unit.
I am trying to get a number on the hours run. The weight may be available from Helisys, it's not in any of our documentation.
Lakeland Mold Company
1021 Madison Street
Brainerd, MN 56401
>>> Leon Cox <firstname.lastname@example.org> 08/29/00 06:04PM >>>
I would like to know the age, condition, weight, footprint and facility
requirements for the LOM. We have a lab for Technology and Engineering
students here at New Mexico State University - we do not have an RP
system. http://speedracer.nmsu.edu to see our web page.
--- Glen Young <Glen.Young@lakelandmold.com> wrote:
> We have a Helisys LOM machine we will be entertaining bids on.
> Any interested parties please contact the following for more
> Glen Young
> Lakeland Mold Company
> 1021 Madison Street
> Brainerd, MN 56401
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
Do You Yahoo!?
Yahoo! Mail - Free email you can access from anywhere!
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:04:12 EEST