0.006" is nominal
Although 4 to 8 thou should build most parts without a problem.
From: Christos Derdas [mailto:firstname.lastname@example.org]
Sent: 25 07 2000 15:17
Subject: SLA 250/30 Gap
Does anybody know which is the nominal gap between the part and the blade
for an SLA250/30?
Thanking you in advance
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:56 EEST