Over the years we've precision cast multiples of hundreds of designs of
prototype electronic parts, mostly in A356-T6, 20C and Zamak3 alloys, using
Sanders patterns. It is the only RP process we've found to be capable of
these often tiny and intricate parts. Yes, it's the way for you to go,
especially if your parts tend to be small and intricate.
At 04:22 PM 6/29/00 -0700, you wrote:
>Anybody using the Sanders machines for conceptual design work? I know that
>their marketing really targets the jewelry industry, but I'm really
>interested in using this equipment to make conceptual prototypes for
>consumer electronics products. We're also looking at the Stratasys FDM 3000
>for this same purpose (yes, I know they are entiely different machines in
>just about every way.) I'd be interested in feedback from both sides of the
>Thanks in advance.
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:46 EEST