We have seen the same problem on our 2000 but ours is intermittent. It seems
to shift for about an inch then it will shift back. On a 12" build we have
seen as many as four occurrences. of this happening. I was told that the
galvos are sticking but I never got a definitive answer or solution to fix
the problem. I would be interested to know what you find out.
From: Drew Brown <email@example.com>
To: RPML <firstname.lastname@example.org>
Date: Thursday, June 08, 2000 8:54 AM
Subject: SLS part shifting
>Recently we have experienced part shifting on one of our Sinterstations.
>It appears that every few inches in the Z direction we see a small X-Y
>shift in the part. Has anyone had this experience and what corrective
>measures were taken?
>Thanks in advance.
>Conceptual Reality L.L.C.
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:38 EEST