Thanks for your help.
From: Rick Kondel <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Date: 17 May 2000 5:16 PM
Subject: Re: Izod Conversion
>You really can't compare numbers between the two tests because they use
>different specimen sizes and notch depths. Results obtained from ASTM
>testing do not correlate with ISO or DIN testing. If you want to convert
>ASTM test results (J/m) to ISO or DIN (kJ/m2) do the following:
>Divide J/m by the second dimension in the test, 0.0102m (0.40in). This
>will give you J/m2. Divide this value by 1000 (1000J/kJ) to get kJ/m2.
>At 09:46 AM 5/17/00 -0400, you wrote:
>>Part Time Student
>>Coventry, West Midlands CV1 5FB
>>Phone : +44 (0)24 76416845 (home)
>>E-mail : email@example.com
>>I would like to know how to convert ASTM D256 impact strength readings of
>>J/m into European DIN 53453 impact strength readings of kJ/m2 and Visa
>>I am currently into the final year project for my M.Sc. degree on Rapid
>>Prototyping (RP), and am compiling a list of various RP manufacturers and
>>the materials they currently offer. The list contains material properties
>>but these are difficult to compare when some readings are in J/m and
>>others are in kJ/m2..
>>I would be grateful of any help on this matter ASAP..
>ATTENTION: This transmission is intended for the recipient named above and
>is considered CONFIDENTIAL. If the reader of this message is not the
>intended recipient or the recipient's representative, please notify the
>sender named above immediately. You are hereby notified that any
>dissemination, distribution, or copying of the information contained in
>this e-mail without the permission of the recipient named above is
>prohibited. Thank you for your cooperation.
>Plastics Technology Laboratories, Inc. reports are issued for the exclusive
>use of the clients to whom they are addressed. No quotations from reports
>or use of the Plastics Technology Laboratories, Inc. name is permitted
>except as expressly authorized in writing. Letters and reports apply only
>to the specific materials, products or processes tests, examined or
>surveyed and are not necessarily indicative of the qualities of apparently
>identical or similar materials, products or processes. The liability of
>Plastics Technology Laboratories, Inc. with the respect to services
>rendered shall be limited to the amount of consideration paid for such
>services and not include any consequential damages.
>Plastics Technology Labs
>50 Pearl Street
>Pittsfield, MA 01201
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:30 EEST