For plotted contours, I have used a product called Draftsman+ from Arbor
Image. It does a reasonably good job of vectorizing a scanned image. Once
vectorized, you can export as DXF, IGES, etc. Be aware that there is always
some manual cleanup to do. Sometimes it's easier to import a scanned image
into your CAD package (AutoCAD can do this) then manually trace the loft
If all you have now are ASCII point files, I recommend Cadkey with Fastsurf.
Fastsurf has a very good ASCII Import utility that will create splines
through the points.
5443 Beethoven St.
Los Angeles, CA 90066
----- Original Message -----
From: "Narva, Jeffrey P" <email@example.com>
To: "'rpml'" <firstname.lastname@example.org>
Sent: Tuesday, May 16, 2000 12:18 PM
Subject: Loft line data
> Dear members,
> Does anybody know if there is software available to convert loft
> line data points or loft line equations into an iges file or some similar
> format? Any info will be greatly appreciated.
> Jeff Narva
> Raytheon Systems-Indpls
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:30 EEST