All you need to do is seal the parts and paint it with a silver loaded
conductive paint. Once you have done this any normal electroplating shop
will be able to plate it for a few dollars!
Prof. P. M. Dickens
Dept. of Mech. & Manuf. Eng.
De Montfort University
England LE1 9BH
Tel: +44 (0)116 257 7689
Fax: +44 (0)116 257 7025
Mobile: +44 (0)468 827039
From: Ron Clemons [mailto:firstname.lastname@example.org]
Sent: 21 April 2000 15:57
To: RP Mailing List (E-mail)
Subject: Metal Coated Parts / RP&M
Good morning all. We may need to get 4 to 5 relatively small SLS DuraForm
parts metal coated in chrome, nickel, brass or something like that. We've
gotten a quote of ~ $4000 to coat ~$450-worth of prototypes, which seems
high to me. Any suggestions as to where we could get this done more
As an aside, I thought the RP&M show at Rosemont was pretty cool. It was
good to meet many of our customers, competitors and fellow-RPML'rs. The
booth that I found most interesting was Stratasys' because of its nifty
samples. Although the RP/RM technologies have not fulfilled the lofty hopes
of many (i.e. production parts produced at Kinkos for little dinero), the
quality of materials and parts gets a little better each year across the
board. The only thing that really sucked at the show was the $7.25
mini-soda/hotdog /nachos meal deal at the concession stand.
Take it easy and thanks in advance for any helpful responses.
"Where Innovation Takes Shape"
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:21 EEST