Good Morning Keith:
We have been saved many times by our APC (American Power Conversion) "Smart
UPS 2200" on our SLA 250/50. To date, I have not found a reasonable UPS
for our SLA 5000. Please let me know if you get any answers concerning
units with that power output capability.
Thanks in advance,
InterPRO Rapid Technologies
At 08:23 AM 04/11/2000 -0600, Keith Wheadon wrote:
>This past weekend, I had some parts running on the SLA machine, and
>there was a power outage during the build. Monday morning, then machine was
>off with the zephyr bar sitting idle in the middle. Subsequently, the laser
>took a looooonnnngggg time getting warmed up, and I had to redefine where the
>laser scanned the sensors. The whole process was 3 hours of lost time.
> Does anybody know of a good backup power system, or something that will
>gradually turn the machine off in case of another power failure?
>Keith D. Wheadon
>Rapid Prototyping Manager
>Solid Design & Analysis
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:03:15 EEST