I am building a 1/6th scale of an aircraft for a show coming up and have it
split into several sections. I have two platforms one on our Zypher machine
and one on our Doctor machine. The Zypher is fine but the Doctor build is
having! I hollowed out the fuselage of the aircraft to reduce weight but
created a giant trapped volume. The wall thickness is 1" and what seems to
be happening is... I get a sweeper stall error every quarter inch or so. I
do not see ant delaminated surfaces or wall blow-outs. I am 4.5" into a 19"
tall build and have been periodically dropping the platform an extra .006"
(one layer thickness). I'm not used to building ACES parts this size and
am a bit confused as to what to do to salvage the build.
Thanks in advance!
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 23:02:52 EEST