MIM (metal injection molding) is one way to get almost directly to pure Ti metal parts.
It's not a piece of cake but it certainly works for relatively small parts, a few companies are selling feedstock
for Ti parts injection.
Let me know if you need a pointer for this route.
"Miller, Michael W" wrote:
> Anybody out there have any links, knowledge or contact info about titanium direct-to-metal sintering? Thanks,
> Michael W Miller (Mike.Miller3@PSS.Boeing.com)
> The Boeing Company MS 17-PE B-XT62
> Propulsion Experimental Hardware 206-655-3289
> Rapid Prototyping 655-4366 Lab 655-4365
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
-- Jean-Marc Boéchat email: firstname.lastname@example.org MIM Systems Ltd phone:+4126 430 08 08 fax: +4126 430 08 09 Swiss Branch office P.O. Box CH- 1723 Marly 2 Switzerland "when things go wrong, don't go with them!"
Please remove the nafof in my e-mail address before use! Disclaimer: "I speak for myself only, it's hard enough!"
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:52:08 EEST