Terry (all): You might contact firstname.lastname@example.org who can do it for you.
I see that HGA has taken hold in our lexicon! How fast things move.
Best Regards, Tom Richards, Metallurgist
At 08:23 PM 2/2/99 -0500, you wrote:
>I'm working with a company that wants to produce very small holes in steel.
> What would you use to produce 5 to 20 HGA diameter holes in 0.25 inch (6.5
>mm) thick tool steel. What is 5 to 20 HGA you ask? Well, to most
>Americans, it's 0.005 to 0.020 inch, .... and to the rest of the world,
>it's 0.125 to 0.5 mm. That's small, but I am under the impression that
>lasers are available that can produce holes that small?
>Wohlers Associates, Inc.
>OakRidge Business Park
>1511 River Oak Drive
>Fort Collins, Colorado 80525 USA
>P.S. I found the GA discussion creative and humorous! Thanks for
>lightening the day.
>For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:50:53 EEST