From: Bert VandenBerg <email@example.com>
To: Paul Burr <firstname.lastname@example.org>
Cc: rp-ml (mailing list) <email@example.com>
Date: Monday, January 25, 1999 9:13 AM
Subject: Re: Newbie's opening volley.
>Paul Burr wrote:(snip)
>> my employer, Giovanni Jewelry (100 Nashua St, Providence, RI )
>> is looking to expand our capabilities with 3D scanning. This is
>> a new area for us, and we'll need all the advice I can gather.
>Almost certainly, you will need to use software to process the scan-data
>into a format suitable for JewelCad. If you want polynomial
>then you might consider:
>- surfacer (from Imageware). it offers a broad toolkit, and has good
>tools to go from a scan cloud, to nurb surface model. Prices depend on
>what you get.
>Bert van den Berg E-mail: firstname.lastname@example.org
>Hymarc Ltd. http://www.hymarc.com
>35 Antares Drive Tel: (613) 727-1584
>Ottawa, Ontario K2E 8B1 Fax: (613) 727-0441
Bert: thanks for the thoughtful reply and I'll cruise over and check your
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:50:50 EEST