> -----Message d'origine-----
> De: Andrzejewski, Jan [SMTP:email@example.com]
> Date: lundi, 27. juillet 1998 16:26
> À: rpml
> Objet: Re: [CLI-hatcher]
> Correct me if I am wrong but I was under the assumption that the .CLI
> was just the boundary contour description and that 3D Systems software
> read in this file and then you apply the hatching parameters for the
> type of
> build you want. even allowing for beam compensation.
> The only problem slicing from this format is that you have to build it
> that Z axis orientation.
> Nakis P. Karapatis wrote:
> > I would like to be able to modify hatch parameters in the file.
> Nakis What piece of software are you using to modify the hatch
[karapatis nakis] None at the moment - I just generate the
contour with magics and try to write some code to generate hatches - not
The hatches are specified in the .cli format
(http://www.cranfield.ac.uk/aero/rapid/CLI/cli_v20.html), but I don't
know of programs generating cli hatching...
> Could someone send me the ASCII description of the .CLI format from a
> box X,Y,Z
> ( 50mm x 60mm x 2mm ) sliced at a layer thickness of 0.5 mm and I will
> into writing a conversion program to Heidenhein conversational machine
> language for a Laser machining centre.
[karapatis nakis] (see url above).
> Jan Andrzejewski firstname.lastname@example.org
> RP Operation Manager
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:46:20 EEST