How many CAM programs are going to the .stl file as an option for
What are the major drawbacks of using STL instead of Iges?
I would assume that an iges file, with the nurbs information, would make
a smoother finish on the part. The part made from STL would be as
faceted as the original stl file, unless further operations were applied
to the file.
Does using an STL file solve more problems than it creates?
-- michael rees SCULPTOR http://www.sound.net/~zedand00/ 1212 w 8th St. Bldg B #2, 816 753 3020 voice firstname.lastname@example.org KC, Mo 64101 816 753 1542 fax
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:46:10 EEST