>From: KHVD07A@prodigy.com (MR ALBIN A HASTBACKA)
>Date: Mon, 25 May 1998 13:14:58, -0500
>Subject: Re: Dynamic Tooling-Jet Mold
>I have heard from several sources that the 3D KELTOOL operation will
>not guarantee any of the tools that they fabricate, unless they are
>made from 3D SLA patterns. Looks like Dynamic Tooling should have an
>easy competition against the NEW KELTOOL regime.
> I have met the principal of Dynamic Tooling, and was quite impressed.
> He has made tools using the Sanders ModelMaker patterns--and they
>were downright IMPRESSIVE. We expect to provide him with some
>patterns made on the Sanders Bigfoot Rapid ToolMaker (up to 30 cm x
>30 cm x 30 cm patterns)--where the results should be ABSOLUTELY
>BEAUTIFUL. The Dynamic Tooling process can accomodate the large
>patterns made on the Bigfoot System, where the KELTOOL process is
>limited to 10 cm x 10 cm x 10 cm.
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:41 EEST