As far as I know, you won't go very far below 0.1 mm accuracy with rp
systems (please let me know if i'm totally wrong !!!) such as SLS.
Again, if what you need is a PA prototype for function test, SLS is the
right method. Even better would be to make a prototype mold (by SLS) and
inject the prototype part ("production prototype"). If it's just for
assembly testing, i'd say SLA is a good choice...
> -----Message d'origine-----
> De: Pedro Garayo [SMTP:firstname.lastname@example.org]
> Date: dimanche, 16. mars 1997 20:37
> À: email@example.com
> Objet: Some easy questions
> Dear rpmlers,
> Are there any systems able to obtain an accuracy of 0,07 mm. or
> Is it SLS(using PA11) the most suitable for prototypes to be used in
> (The part fits in 250x100x40 mm. and it is 1.5 mm. thick)
> Thank you very much.
> Pedro Garayo
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:07 EEST