Are you using Buildstation 4.1.1? It seems that Maestro 1.9.1 and B/S
4.1.1 are a package. When you use one without the other, build problems
occur due to a differenent method of calculating hatch velocity vectors.
Actually, regardless of B/S software used, I think this applies to you
because of the Somos resin needing custom styles.
You'll have to redevelop your custom styles with an adjustment in the
hatch overcure values. My info is only for Ciba resin, but maybe you
can extrapolate an answer from this:
Maestro 1.9.1 and:
B/S 4.1.1 B/S4.0 or DOS
SL5180 0.000mm -0.075mm
SL5410 0.032mm -0.025mm
> Dan Davis
> Division Head, RP&M
> Perusahaan Otomobil Nasional Berhad (PROTON)
Hicom Industrial Estate
Batu 3 PO Box 7100
Shah Alam, Selangor D. E.
> +60 3 515-3906 direct line
> +60 3 515-2380 direct fax
> +60 12 277-5770 hand phone
> From: Sin Wing CHAN[SMTP:SWCHAN@hkpc.org]
> Sent: Saturday, 28 February, 1998 09:16
> To: email@example.com
> Subject: Slicing problem with Maestro 1.9
> Dear All
> We recently installed Maestro 1.9 on our SGI high impact. The "Vista"
> software for support generation and editing is fine. The "View"
> programme is also fine. However, we suffer from a problem with the
> "Slicing" .
> Since we are using Du Pont 6110 resin in our SLA 250, I simply copied
> the styles to the new Maestro software from our very old "Partman"
> program. The result of SLA espically in the final filling is extremely
> The Up facing surface has so poor quality that ripple surface results.
> suspected that it is because of our wrong setting in Slicing with
> When I used the support generated from Vista in Maestro but slicing in
> our old partman programme, the Up face surface has shining and flat
> quality. I have tried to adjust the parameters of Maestro but fail to
> achieve the same result.
> Can anyone give me some suggestions in adjusting Maestro Parameter?
> Norman Chan
> Rapid Prototyping Technology Centre, Hong Kong
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:01 EEST