> From: Monica & Glenn Whiteside <SiderWhite@worldnet.att.net>
> To: email@example.com
> Subject: APM Inc. - Ciba drawing die resin
> Date: Saturday, February 28, 1998 5:45 PM
> Thank you very much for your detailed reponse to my questions. I shared
> your information with our pattern shop foreman and he was familar with
> accelerators and "lightners" you mentioned. Since our pattern shop is
> temperature or humidity controlled (other than heat in the winter) we
> to use some work-arounds to use this resin (Ciba RP 6470) successfully.
> The shop foreman says that they have to cast it and then pull it out of
> mold ASAP, then they put it back into the mold and recast a face coat on
> to fill in for the shrinkage. This seems like a more time consuming
> but given our facilities budget, I guess this is what we have to live
> for now.
> Again, thanks for your suggestions.
> Glenn Whiteside
> Cessna Aircraft
> e-mail: firstname.lastname@example.org
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:45:01 EEST