The extra 0.3mm extra Z curing occurs on the first supported layer of
every build. This is because the laser over-shoots the first layer as
their is no cured material underneath. Subsequent layers consist of
liquid resin and already cured resin so the depth is easily defined and
maintained. As I am aware of their is no current solution for this
It would be interesting to know if one exists!!
> TO: firstname.lastname@example.org at #smtp
> Dear RP-ML users,
> We have a SLA 250. The parts built are always
> 0.3 mm too high (z-direction), no matter what>
> size the product is. In x-y there is no problem.
> I have a feeling it's in the intersection between
> > supports and product. Any suggestions?
> > J.C. Mikkers.
> For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
For more information about the rp-ml, see http://ltk.hut.fi/rp-ml/
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:44:55 EEST