>Besides our Stratasys, Helisys, Kira and Actua machine we make use of
>3, 4 and 5 axis milling techniques.
>In a few days we will order our new High Speed Milling machine from
>Mikron, the HSM 700. We heard that some controlers for such a machine
>like Siemens, Fanuc and Heidenhain/ATEK-HS-plus can use B-spline
>machining for making the product. My question:
>Is there anybody out there who knows anything about B-spline
Yes, but only a little. This ability of the CAM software and the controls on the M/C tool will give much better quality surface finish, smaller NC file sizes and faster cut times
>What is the input for such a controller and which CAD-CAM system van
>make such a input?
Jan, Unigraphics V13.0 supports NURB output, (up to order 4 cubic splines). A UG file looks like this before postprocessing.
>Is there anybody out there who knows anything about the Siemens,
>Fanuc or Heidenhain/ATEK-HS-plus controllers.
These are the three that I know of who currently support this type of interpolation. Some examples follow:-
N0100 G05 P10000
N0110 G06.2 P4 K0. X-1.6953 Y-.75 Z-.2358 F10.
N0120 K0. X-1.6544 Z-.2313
N0130 K0. X-1.5752 Z-.2225
N0140 K0. X-1.4053 Z-.2067
N0150 K.0313 X-1.3031 Z-.1982
N0160 K.0781 X-1.1215 Z-.1847
N0330 K.9063 X1.7085 Z-.2373
N0340 K.9688 X1.75 Z-.2421
N0390 G01 Y-.7188 Z-.238
N0090 X-1.6953 Z-.2358
N0100 BSPLINE SD=3 PL=0. X-1.6544 Y-.75 Z-.2313 F10.
N0110 PL=.0313 X-1.5752 Z-.2225
N0120 PL=.0469 X-1.4053 Z-.2067
N0130 PL=.0469 X-1.3031 Z-.1982
N0140 PL=.0313 X-1.1215 Z-.1847
N0300 PL=.0625 X1.6138 Z-.2263
N0310 PL=.0313 X1.7085 Z-.2373
N0320 PL=0. X1.75 Z-.2421
L X-1.695 Z-.236
SPL X-1.587 Y-.75 Z-.224 K3X-.0135 K2X.013 K1X-.108 K3Y0.
K2Y0. K1Y0. K3Z-.0012 K2Z.0005 K1Z-.0111
SPL X-1.418 Y-.75 Z-.208 K3X.0224 K2X-.0381 K1X-.1531 K3Y0.
K2Y0. K1Y0. K3Z.0018 K2Z-.0041 K1Z-.0137
SPL X-1.277 Y-.75 Z-.196 K3X-.026 K2X.04 K1X-.155 K3Y0.
K2Y0. K1Y0. K3Z-.0022 K2Z.0024 K1Z-.0119
SPL X-1.164 Y-.75 Z-.188 K3X.0084 K2X-.0073 K1X-.1138 K3Y0.
K2Y0. K1Y0. K3Z.0007 K2Z-.001 K1Z-.008
>I really like to hear anything from somebody!!!!!
>All the best from Holland and more specific Delft
>Jan Willem Gunnink
Hope this helps. Also you might like to try our web site at www.ug.eds.com.
All the best from Australia and more specifically Sydney!
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:40:50 EEST