Hi Barney Sing
Thanks for the costing information , it is refreshing to get a users opinion of a process rather than a sales driven one .
What cost per Kilo does the DTM metal powder material work out to be ( $100US/Kg?) if so then that appears to be a competitive
disadvantage for this process .
Did some of your costs come from the amount of finishing / polishing work required on the inserts? and how did the accuracy stack up for a typical injection mould component .
Our requirements are for producing prototype injection moulds quickly and cheaply for typical runs of 200 parts for life testing prior to final design and production tooling release .
From: Barney Sing
Sent: Friday, 17 October 1997 11:32
To: Phil Malone
Subject: dtm rapid tooling
an ambitious task... rapid tooling!
Our company used and invested in DTM Rapid Tooling.
We found the process to be more expensive than conventional AL tooling.
$14K US dollars to fill a Sinterstation 2000 only 65% full.
A huge amount of AL can be purchased for this amount.
Relatively, our "cost" of a DTM rapid tool was 2-3 times that of
conventional tooling methods... Most part geometries of comparable
complexity only achieved a 3-5 day increase in time. Yet cost us -not
the customer- 2-3 times more.
We are no longer using DTM's Rapid Tooling.
-- _______________________________________________________ Barney Sing Global Tool and Engineering Ph: 972.241.4300 Ext. 107 Fx: 972.241.3195 Em: email@example.com http://www:globaltool.com
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:40:35 EEST