>>From email@example.com Thu Apr 03 21:26:41 1997
>Date: Fri, 4 Apr 1997 00:10:20 -0500
>From: firstname.lastname@example.org (C.McArdle)
>Subject: AutoCAD (was Re: 3D in CAD)
>Cc: email@example.com (Ray Bradford)
>Ray (and everybody),
>Does AutoCAD export .stl files?
When ouputting .STL from any of the AutoCAD Revisions, even on a setting of
10, the files still can suffer poor tessellation. A couple of ways to
1) Increase the part size by a certain factor (2x, for example), then do an
.STL output. Once the .STL is output you can reduce the part back to the
percentage. This basically fools the output into more triangles. I've
but hear this works.
2) Output an .IGES file and use Brockware or other translators to output the
file. On AutoCad, CADkey and some of the other less expensive packages, this
option is preferrable to using their own .STL utilities.
Best of Luck,
ARRK-San Diego, CA
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:39:29 EEST