At 03:36 PM 6/5/96 -0400, RoyJRATC@aol.com wrote
>Customer of mine recently made an STL from his ProE file. In error he set the
>chord height much higher than normal - turning all radii into flat polygons.
>Unfortunately, he did not realize this before he sent the file out to be
>built (local SLA house). Unfortunately when the prototype came back in,
>Marketing got a hold of it & fell in love with the radical new design & wants
>the new product to be manufactured like this.
>My customer now needs to be able to revert the STL back into a ProE file
>without rounding out the flats. If he can't get this back in to ProE is there
>a way he can get an IGEST file from this STL?
We have our STLtoIG product which will convert stl files to IGES -
Wireframe or Surface. It is included with our IGES to STL product, and
is also available separately.
STLtoIG can combine 2 adjacent triangles into "rectangles", so you will end up
with lots of small 3 and 4 sided surfaces. If the stl file is valid (the
vertices match), it is theoretically possible to sew these surfaces into
a solid. HOWEVER, the sewing operation on your favorite BREP solid modeler
is probably designed to deal with the number of faces typical of its own
models, say a few thousand, and so may choke on the tens of thousands of
surfaces from the typical STL file.
C. Brock Rooney, Pres., Brock Rooney & Associates Inc. (Brockware)
268 George St. Birmingham Michigan 48009 USA
(810) 645-0236 fax/bbs (810) 645-9020 email email@example.com
This archive was generated by hypermail 2.1.2 : Tue Jun 05 2001 - 22:37:23 EEST