Re: Sealing Duraform GF Parts
Has anyone tried a liquid or sprayable sanding sealer like Minwax?
From: rp-ml-owner_at_rp-ml.org [mailto:rp-ml-owner_at_rp-ml.org] On Behalf Of David K. Leigh
Sent: Tuesday, March 18, 2014 11:28 AM
To: Michael Esser Jr
Cc: rp-ml_at_rp-ml.org
Subject: Re: [rp-ml] Sealing Duraform GF Parts
Two main ways to do it... A thick coating that creates an internal shell - like a plasti-dip or more industrial polyurethane or epoxy. The other is a low viscous sealer that will soak into the part and seal the porosity - like a polyurethane or cyanoacrylate.
A few other notes. Sealers don't work well once the part has already been exposed to the liquid and started to leak. Also, you want to run very dense parts. Machine settings will definitely impact final part characteristics and properties.
Sent from my iPhone
On Mar 18, 2014, at 11:55 AM, "Michael Esser Jr" <michael.esser_at_dielectriccorp.com<mailto:michael.esser_at_dielectriccorp.com>> wrote:
Hi all,
What is the best way to seal a hollow Duraform GF part to hold liquid with no leaks? Please advise.
Thank you,
Mike
Received on Thu Apr 03 2014 - 19:45:26 EEST
This archive was generated by hypermail 2.3.0
: Tue Feb 13 2018 - 12:38:57 EET