That test was must appreciated. Thank you
-----Original Message-----
From: Morley, Ed [mailto:morley.e_at_pg.com]
Sent: Monday, March 11, 2013 5:24 AM
To: Lino P. Stavole; reinhardt_at_microtec-d.com; stef.fast3d1_at_wind.blackberry.com
Cc: Richard Bendall; David Gurrola; Carl Dekker; Jeremy Pullin; Mullen, John; rp-ml_at_rapid.lpt.fi
Subject: RE: R: RE: [rp-ml] additive produced multi-color pony
Out of interest I made a very similar pony (10mm tall) on a Connex and a Viper Si2 to see how they compare. I can't touch the mysterious "RMPD" process for resolution at least. It would be good to know the limitations of the process.
(See attached for the STL file and results)
-----Original Message-----
From: Lino P. Stavole [mailto:lino_at_creaturecompany.com]
Sent: 05 March 2013 21:07
To: reinhardt_at_microtec-d.com; stef.fast3d1_at_wind.blackberry.com
Cc: Richard Bendall; David Gurrola; Morley, Ed; Carl Dekker; Jeremy Pullin; Mullen, John; rp-ml_at_rapid.lpt.fi
Subject: Re: R: RE: [rp-ml] additive produced multi-color pony
No way connex could print that at 10mm
"Andrea E. Reinhardt" <reinhardt_at_microtec-d.com> wrote:
>Dear Stefano,
>
>yeah ? 10mm µponies / football player / 1,5 cm eiffel tower ?
>see here http://twitpic.com/photos/minamnanofuture
>
>please send the link for orders
>so we can forward the requests we have in the art/fun area to you
>
>Best regards
>Andrea
>
>-------- Weitergeleitete Nachricht --------
>Von: stef.fast3d1_at_wind.blackberry.com
>An: reinhardt_at_microtec-d.com, Richard Bendall
><Richard.Bendall_at_Renishaw.com>
>Kopie: David Gurrola <david_at_growit3d.com>, Morley, Ed
><morley.e_at_pg.com>, Carl Dekker <carl.dekker_at_met-l-flo.com>, Jeremy
>Pullin <Jeremy.Pullin_at_Renishaw.com>, Mullen, John
><johnmullen_at_hasbro.com>, rp-ml_at_rapid.lpt.fi <rp-ml_at_rapid.lpt.fi>
>Betreff: R: RE: [rp-ml] additive produced multi-color pony
>Datum: Tue, 5 Mar 2013 18:08:03 +0000
>
>Certainly yes, using Veroblack and Veroclear
>
>Regards
>Stefano
>FAST 3D
>Sent from my BlackBerry® wireless device from WIND
>
>_______________________________________________________________________
>_
>From: "Andrea E. Reinhardt" <reinhardt_at_microtec-d.com>
>Sender: owner-rp-ml_at_rapid.lpt.fi
>Date: Tue, 05 Mar 2013 18:47:55 +0100
>To: Richard Bendall<Richard.Bendall_at_Renishaw.com>
>ReplyTo: reinhardt_at_microtec-d.com
>Cc: David Gurrola<david_at_growit3d.com>; Morley, Ed<morley.e_at_pg.com>;
>Carl Dekker<carl.dekker_at_met-l-flo.com>; Jeremy
>Pullin<Jeremy.Pullin_at_Renishaw.com>; Mullen,
>John<johnmullen_at_hasbro.com>; rp-ml_at_rapid.lpt.fi<rp-ml_at_rapid.lpt.fi>
>Subject: RE: [rp-ml] additive produced multi-color pony
>
>
>Mentioning Connex, a 10 milimeter high mulit color pony could be done
>with this system?
>Thanks for info
>Andrea
>-------- Weitergeleitete Nachricht --------
>Von: Richard Bendall <Richard.Bendall_at_Renishaw.com>
>An: David Gurrola <david_at_growit3d.com>, Morley, Ed <morley.e_at_pg.com>,
>Carl Dekker <carl.dekker_at_met-l-flo.com>, Jeremy Pullin
><Jeremy.Pullin_at_Renishaw.com>, Mullen, John <johnmullen_at_hasbro.com>,
>reinhardt_at_microtec-d.com <reinhardt_at_microtec-d.com>, rp-ml_at_rapid.lpt.fi
><rp-ml_at_rapid.lpt.fi>
>Betreff: RE: [rp-ml] additive produced multi-color pony
>Datum: Tue, 5 Mar 2013 16:13:15 +0000
>
>I’m not so sure, the build lines of the mane and tail are at a
>different orientation than the body, if it was one hit on a Connex they
>would be in the same plane. At a guess I’d say they’ve glued separate
>components together.
>
>
>
>Regards
>
>
>
>Richard
>
>
>
>
>
>From: owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of David Gurrola
>Sent: 04 March 2013 17:33
>To: Morley, Ed; Carl Dekker; Jeremy Pullin; Mullen, John;
>reinhardt_at_microtec-d.com; rp-ml_at_rapid.lpt.fi
>Subject: RE: [rp-ml] additive produced multi-color pony
>
>
>
>
>I would put my money more on a Stratasys Connex. The combination of
>dual materials (colors) and layer lines are what is making me think
>that. If you zoom in, it shows signs of the Polyjet technology as well.
>
>
>
>Interested to see where things go with this.
>
>
>
>Regards,
>
>
>
>David Gurrola
>
>President & C.E.O.
>
>GROWit LLC
>
>949.305.4004
>
>http://www.growit3d.com
>
>
>
>Description: cid:image005.png_at_01CD9263.748DCC80 Description:
>cid:image006.png_at_01CD9263.748DCC80 Description: Description:
>Description: Visit our blog Description:
>cid:image008.png_at_01CD9263.748DCC80 Description:
>cid:image009.png_at_01CD9263.748DCC80 Description:
>cid:image010.png_at_01CD9263.748DCC80 Description:
>cid:image011.png_at_01CD9263.748DCC80
>
>
>
>Description: Description: Description: Description: Description: new
>logo TM
>
>SLA ∆ FDM ∆ LS ∆ MLS ∆ Color 3D Printing ∆ Multi-Material Polyjet ∆ 3D
>Scanning
>
> Silicone Molds ∆ Project Management ∆ Professional Engineers
>
>
>
>
>
>
>
>From:owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of Morley, Ed
>Sent: Monday, March 04, 2013 9:22 AM
>To: Carl Dekker; Jeremy Pullin; Mullen, John; reinhardt_at_microtec-d.com;
>rp-ml_at_rapid.lpt.fi
>Subject: RE: [rp-ml] additive produced multi-color pony
>
>
>
>
>I’m pretty sure that it’s actually an SLA. Don’t forget its only 10mm
>tall, so for an RP part the resolution is quite good (far exceeding an
>FDM machine at least).
>
>
>
>
>
>From:owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of Carl Dekker
>Sent: 04 March 2013 16:54
>To: Jeremy Pullin; Mullen, John; reinhardt_at_microtec-d.com;
>rp-ml_at_rapid.lpt.fi
>Subject: RE: [rp-ml] additive produced multi-color pony
>
>
>
>
>I would have guessed a laboratory genome splicing activity gone awry.
> Or it could be someone hoping to pay for a low end extrusion unit,
>quick! J
>
>
>
>Thank you,
>
>
>
>Carl Dekker
>
>dekker_at_met-l-flo.com
>
>Phone: (630) 409-9860 Ext 227
>
>
>
>AS 9100C:2009-01- #10009992 ASH
>
>ISO 9001:2008 - #1000992 QM08
>
>
>
>
>From:owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of Jeremy Pullin
>Sent: Monday, March 04, 2013 10:26 AM
>To: Mullen, John; reinhardt_at_microtec-d.com; rp-ml_at_rapid.lpt.fi
>Subject: RE: [rp-ml] additve produced multi-color pony
>
>
>
>
>John
>
>
>
>I and I dare to say many of the people on this list would genuinely
>love to know what Hasbro legal has to say about this. I’m not sure if
>you would be allowed to share their response with us but if you can it
>would be greatly appreciated. I have to agree with you about the
>quality though. The head actually looks more like a pig’s head with a
>70’s glam rock hairstyle.........errrr so my dad told me.
>
>
>
>Jeremy.
>
>
>
>From:owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of Mullen, John
>Sent: 04 March 2013 15:30
>To: reinhardt_at_microtec-d.com; rp-ml_at_rapid.lpt.fi
>Subject: RE: [rp-ml] additve produced multi-color pony
>
>
>
>
>I wonder what opinion Hasbro Legal would have about this? Not only is
>it a copy of our My Little Pony Pinkie Pie but a bad one, both in data
>and quality.
>
>
>
>John Mullen
>
>Rapid Prototype Manager
>
>Hasbro, Inc. 1027 Newport Ave. Pawtucket, RI 02862
>
>401.727.5194
>
>johnmullen_at_hasbro.com
>
>
>
>
>From:owner-rp-ml_at_rapid.lpt.fi [mailto:owner-rp-ml_at_rapid.lpt.fi] On
>Behalf Of Andrea E. Reinhardt
>Sent: Monday, March 04, 2013 9:31 AM
>To: rp-ml_at_rapid.lpt.fi
>Subject: [rp-ml] additve produced multi-color pony
>
>
>
>
>For sale at ebay http://www.ebay.com/itm/281071176083
>Any smaller ones for sale?
>
>
>-----------------------------------------------------------------------
>--------------------------- This email and any attachments are
>confidential and are for the use of the addressee only. If you are not
>the addressee, you must not use or disclose the contents to any other
>person. Please immediately notify the sender and delete the email.
>Statements and opinions expressed here may not represent those of the
>company. Email correspondence is monitored by the company. This
>information may be subject to export control regulation. You are
>obliged to comply with such regulations.
>
>Renishaw plc (company number 1106260), Wotton Travel Limited (company
>number 01973158) and Renishaw Advanced Materials Limited (company
>number 04632041), are companies registered in England and Wales with a
>registered office at New Mills, Wotton-under-Edge, Gloucestershire,
>GL12 8JR, United Kingdom, Telephone +44 1453 524524.
>-----------------------------------------------------------------------
>---------------------------
>
>
>
>
>
>_______________________________________________________________________
>_
>
>This e-mail and any attachments are confidential, intended solely for
>the addressee and may also be privileged or exempt from disclosure
>under applicable law. If you have received this e-mail in error, please
>notify the sender immediately and delete it from your system. Replies
>to this e-mail may be monitored by P&G for operational or business reasons.
>Views or opinions expressed by an individual within this communication
>may not necessarily reflect the views of P&G or its
>associated/subsidiary companies
>
>Gillette Management LLC. Registered in Delaware, USA and Registered as
>a Branch in England and Wales under Branch No. FC15561. Branch
>Registered
>Office: The Heights, Brooklands, Weybridge, Surrey, KT13 OXP. A
>subsidiary of the Procter & Gamble Company.
>
>www.uk.pg.com
>
>
>
>-----------------------------------------------------------------------
>--------------------------- This email and any attachments are
>confidential and are for the use of the addressee only. If you are not
>the addressee, you must not use or disclose the contents to any other
>person. Please immediately notify the sender and delete the email.
>Statements and opinions expressed here may not represent those of the
>company. Email correspondence is monitored by the company. This
>information may be subject to export control regulation. You are
>obliged to comply with such regulations.
>
>Renishaw plc (company number 1106260), Wotton Travel Limited (company
>number 01973158) and Renishaw Advanced Materials Limited (company
>number 04632041), are companies registered in England and Wales with a
>registered office at New Mills, Wotton-under-Edge, Gloucestershire,
>GL12 8JR, United Kingdom, Telephone +44 1453 524524.
>-----------------------------------------------------------------------
>---------------------------
>
>
>
>
________________________________
This e-mail and any attachments are confidential, intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you have received this e-mail in error, please notify the sender immediately and delete it from your system. Replies to this e-mail may be monitored by P&G for operational or business reasons. Views or opinions expressed by an individual within this communication may not necessarily reflect the views of P&G or its associated/subsidiary companies
Gillette Management LLC. Registered in Delaware, USA and Registered as a Branch in England and Wales under Branch No. FC15561. Branch Registered Office: The Heights, Brooklands, Weybridge, Surrey, KT13 OXP. A subsidiary of the Procter & Gamble Company.
www.uk.pg.com
Received on Tue Mar 12 2013 - 00:01:09 EET