From: Charles Overy (cwho@lgmmodel.com)
Date: Tue Nov 26 2002 - 21:19:08 EET
Carlos,
We just went through a CAM eval phase. We felt we needed a more general
purpose CAM than we were using. We settled on Visual Mill 4.0, which is a
tremendous deal especially if you own or want to buy a seat of Rhino or
several other CAD programs that they bundle with. A real bargain is that
the fully functional, Visual Mill 3.0 which does just raster milling,
constant Z, is free (until this spring at least!). You can see if it will
read the stl files ok. 3.0 read our stl's just fine, 4.0 just arrived in
the mail yesterday so I am playing with it today!
url is http://www.mecsoft.com
Best Wishes.
Charles
-----Original Message-----
From: owner-rp-ml@rapid.lpt.fi [mailto:owner-rp-ml@rapid.lpt.fi]On Behalf
Of asrp
Sent: Tuesday, November 26, 2002 3:34 AM
To: Prototyping.dep
Cc: rp-ml@rapid.lpt.fi
Subject: Re: CAM software
Hi Carlos,
WorkNc is one of them, can read STL quite effectively.
www.worknc.com
Best Regards,
Rick
rick@arptech.com.au
www.arptech.com.au
----- Original Message -----
From: "Prototyping.dep" <Prototyping.dep@socem.pt>
To: "Mailing list" <rp-ml@rapid.lpt.fi>
Sent: Tuesday, November 26, 2002 7:38 PM
Subject: CAM software
>
> Hi all
>
> We are currently evaluating MAGICS TOOLING for creating prototype tools
but
> our CAM software canīt read the STL mesh.
>
> Could anyone tell me which CAM software can read this mesh and mill over
it?
>
> Thanks all.
> Carlos Ferreira
> SOCEM ED -Depto. de Prototipagem
> PHONE: +351 244 009900
> FAX: +351 244 009914
> URL: www.socem.pt
> mailto:prototyping.dep@socem.pt
>
>
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Jan 21 2003 - 20:14:41 EET